GET $25 OFF ALL ORDERS OVER $500

Raptor LED Strobe Light
Raptor LED Strobe Light Lens

Raptor LED Strobe Light

$204.99

Wicked Warnings has recently introduced the new RAPTOR LED STROBE LIGHT!! With Amber, White, or Amber&White warning modes AND our popular STEADY WHITE FLOOD MODE this light packs a PUNCH!! 24 total LEDs mean you are NEVER left out in the dark with a RAPTOR on your vehicle. See the light demo in videos tab below.

Additional Details Below
- +
Add to Wishlist
Add to Wishlist
SKU: RAPTOR-1 Categories: ,

THE ALL NEW RAPTOR LED STROBE LIGHT IS HERE!

The Raptor LED Strobe Light is the newest addition to our lineup of Wicked Warnings LED strobes. This strobe is within the same family of lights as our Razor and shares the same SYNCABLE flash patterns also, though the Raptor is much larger. The dimensions of the Raptor’s lens are: 8-7/16”W x 1-7/8”H x 1-3/4”D. Including the housing, the width of this light will measure in at right around 9”.

This robust light is perfect for use in larger vehicles such as dump trucks or flatbeds. The Raptor features an aluminum base and stainless steel outer bezel for added impact resistance. The rounded lens also spreads the light out at 180-degrees for extremely effective warning from this light head. There are 13 total flash patterns and 24 total LEDs within the light, including 12 amber LEDs and 12 white LEDs. This LED strobe is a true dual-color strobe light. This means that you can choose to flash an all-white pattern, all-amber pattern or a pattern that uses a combination of both amber and white strobes. This LED strobe light also features our popular flood mode feature. This feature allows you to steady burn white light throughout the entire light head by connecting the white wire. The Raptor can also be synchronized with some of our other Wicked Warnings strobe light products such as the RAZOR.

Watch our demo video of the Raptor LED strobe light in the Videos tab on this page or on YouTube by clicking here. If you have any questions about the Raptor, please send us an email at info@wickedwarnings.com or send us a message using a form on our website.

Raptor LED Strobe Light Features:

  • 13 Flash Patterns
  • 24 Total LEDs (12 Amber & 12 White)
  • IP67 Waterproof Rating
  • Aluminum Base & Stainless Steel Housing
  • 180-Degree Lens
  • Dual-Color Amber & White Strobe
  • Flash All-Amber, All-White, or Both Amber & White
  • Flashing is 1.0 amp
  • Flood is 0.5 amp
  • 8-7/16”W x 1-7/8”H x 1-3/4”D
  • SYNC with RAZOR and ECO HAW
  • These lights are sold individually.
  • FULL WICKED WARNINGS 2yr WARRANTY

Amp Draw:

LED 12.8V 25.6V 30V
Amber 0.91A ~ 1.23A 0.47A ~ 0.63A 0.41A ~ 0.55A
White 0.91A ~ 1.23A 0.47A ~ 0.63A 0.41A ~ 0.55A
White Steady Burn 0.48A ~ 0.66A 0.27A ~ 0.37A 0.24A ~ 0.32A
Color

Amber-White
Brand

Wicked Warnings

Videos

Installation Guide

Raptor LED Strobe Light Installation Guide

Have a Question?

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Related products

Receive $5 Off

Join our mailing list to receive $5 off your purchase! Coupon can be used once per customer.

Our monthly email will have updates about our latest news, products and updates from our team!

You have successfully subscribed! Enjoy $5 off your purchase by entering the following coupon code at checkout: MY5

Video Demonstration of Wire Swap Installation for Auto Flasher Kits - Molex Connector Pin Removal & Replacement

What are the Wicked Auto Flasher Kits & how do they work?

The ONE and ONLY Wicked Warnings Auto Flasher Module! Beware of cheap copies, make sure your WAF is embossed with WICKED WARNINGS on it. The only module on the market with over 10 years of history and well over 100,000 pieces sold all around the world!

Wicked Warnings has been around since 2005 with stellar references and we have been using our WAF (Wicked Auto Flasher) module with zero reported vehicle failures since we designed it in 2006. There is no known risk to using any factory lighting as flashers that we are aware of. Of course, all your factory lights will always revert to factory function when the strobes are not being used. We have never had a warranty claim or dealer issue related to our Auto Flasher Module.

Many of our builds feature a combination of factory lighting as well as purpose-built emergency lights to create a more effective display, so we urge you to consider more than just factory strobe lighting on your build. We have many options available to supplement the factory lighting.

How does the Auto Flasher connect to my vehicle?

We have 3 connection methods used in our Wicked Auto Flasher kits. The way that we manipulate the factory lighting is through the wires. We DO NOT reprogram any of the computers, nor do we modify the BCM or OBD2 devices. Everything we do is easily reversible, and any number of individual kits can be combined onto a single switch if desired. There is no single kit to flash all factory lights, as we must retain circuit individuality AND redundancy in the system. This means unlike other systems, there is not 1 single flasher that can fail and leave you with nothing working. The following three methods are used to interface with the factory wires.

  • Plug and Play: Our newest kits use a plug and play adapter solution for vehicle interface you install typically between the factory plugs on the headlights, tail lights, and other lights like the cab clearance lights. The other end of our harness needs just switched power to activate your flashing (typically provided by OEM auxiliary switches or an aftermarket switch). Please understand not ALL kits can have a plug and play adaptor, we publish all the options we have. Click here to see a video example of a Plug and Play Kit.
  • Wire Swap NO CUT: This is our cut free solution and how most of the older generation kits were made. It really is just as easy as swapping a wire in a factory connector. Click here to watch a video showing the Wire Swap method. This method is also attractive to skilled installers who want to save money by avoiding plug and play adaptors. We will eventually be phasing this method out in favor of plug and play on all our kits.
  • Wire Cut: In certain situations, the only way to get the access to manipulate the light is to cut a wire. Rest assured in any of our wire cut kits, we provide the detailed instructions on exactly what wire you are cutting and where. We also provide the needed connectors to make the installation reversible by simply unplugging the kit and reconnecting the factory wire with the connectors.

We hope this helps to answer any questions about our Auto Flasher Kits and hope you enjoy these products!